Sales: Mon-Sat 8:30am-5pm
Service: Mon-Fri 8:30am-5pm Get a Quote

Financing Available

Announcement: "Due to High Volume Sales website may not display all available inventory. Call 812-829-0226 for complete inventory check."

See The Difference- Diamond C, Big Tex, PJ Trailers Sure Trac

What is the difference?

Today the trailer market is loaded with Gooseneck Trailers. It can be very hard to choose a trailer that will fit your needs and be what you expect it to be for your hard-earned money. The purpose of this article is to talk specifically about Diamond C's new engineered beam trailer.  Why is it different from Big Tex, PJ, Sure Trac, plus many more? First, I want to say I have nothing against these companies. I know they work hard and have a crew that depends on the sale of their trailers to help support them and their families. So, I was looking through lots of diagrams of trailers looking for what I consider to be different. But the more I looked the more I seen almost the same trailer. Most of these trailers are using the same traditional I-Beam design.  Where the neck is welded every so many foot.  If you notice the Diagram you can see that.Gooseneck Trailer Design

This design works, it's been out there for a very long time. You may find variations in beams usually ranging from 10-14" inches or possibly thicker. This can add weight though and take away from your payload capacity.  Most of these trailers use the same axle companies, the same ramp setups, and axle spreads. One thing I really notice is the small things you use. Such as side steps and grab handles, and toolboxes.  I have seen some small thin handles that almost hurt to use along with a side step that is very small and you can not move. It is permanently in place. Generally, if they are moved, it's because you clocked something pretty solid.

Let's Talk Tires & Axles!

Most gooseneck trailers come standard with 10 ply tires.  These tires generally ride nicer than the 14ply tires. You can opt to go to 17.5 tires and those are 16- 18ply.  You might consider a heavier tire if you are going to be running near your payload or at times over it. This can help support pushing your trailer to its limit. But generally the heavier the tire the worse the comfort of the ride.
Right now they are two main contenders in the axle

Hey, does this have a torque tube?

What is a torque tube? Well if you don't know the torque tube is designed to keep your trailer from swaying left to right while it's loaded.
A trailer that sways a lot will not ride as smooth and can add strain to the welds and boards.  Most trailers with this option use a large pipe running down the center of the trailer and have gussets on each side of the pipe welded to the I beam frame.  Let's see if I can get you a photo here. Take a look below.

This is a feature you generally see in gooseneck trailers but you might need to look.  This is generally a feature you will want if the trailer is at least 30 feet long.

Let's talk about the paint or is it powder coating?

You will find many different opinions when it comes to painting vs powder coating on goosenecks. For the most part, these traditional goosenecks all pretty much use a powder coating other than paint. Why do they do that? Because once you use so much paint, you will have to pay large fees to continue to use it in the commercial world. This is not cost-effective and the alternative is powder coating.  Does everyone powder coat the same? Ah...NO! The powder coating process can take many steps. If one wants to make it great and "some do" it can be an awesome finish. Big companies can also make this short and simple just to get them in and out cookie-cutter style...Next! I have seen trailers come in here with the powder coating falling off in sheets. I have seen really old trailers that have held up very well. There is one thing to consider. You need to keep your trailer clean. If you let a lot of road grime salt and harsh chemicals to get on your finish and you never clean that. I would expect some negative results